Intensive Cleaner for wood, WPC and stone, for outdoor use

Intensive cleaner for deposits left on stone, WPC and wood by weather conditions. Simply and effortlessly removes dirt and stains with a long-term effect. Flammable.

Application Intensive cleaner for all outdoor surfaces diluted with water in a ratio of 1:3 up to 1:5. If necessary, can be used undiluted for stubborn stains. Spread the cleaning solution onto the pre-moistened area and allow to soak in for approx. 10 minutes. Work on the floor surface with a scrubber, brush, or Multi Clean 350 (with a suitable scrubbing brush). Take up the dirty solution with Multi Clean 350, a spray-extractor or with an absorbent mop, then rinse with clear water until it has been completely removed. NOTES: Do not allow the Intensive Cleaner to dry on the surface of all outdoor areas - therefore work in sections. Before stripping and basic cleaning, test sensitive materials for color fastness and resistance at an inconspicuous place. If necessary, dilute the Intensive Cleaner with more water and allow several shorter soak-in stages. CONSUMPTION: 3-5 litres per 100 sq.m (dilution 1:1 up to 1:3) 10-15 Litres per 100 sq.m (undiluted) Technical Data pH-value: approx. 7,5 (conzentrate) Contains substances: less than 5% anionic tenside, non-ionic tenside. Contains fragranc-es, LIMONENE, solvent Giscode: GG 0 (Product code for cleaning and care products) Intensive cleaner for all outdoor areas is subject to the regulations pertaining to hazardous materials and is labelled with the hazard warning "flammable“. Only use in well ventilated areas. Store Intensive Cleaner for all outdoor areas in the closed, original container in a cool, dry place. Keep under lock and key and out of the reach of children.