PU Sealer / Waxnomor
Extremely hard wearing, two part polyurethane-based super sealer for all resilient and resin floors. Forms a finish with excellent elasticity. PU Sealer satin/Waxnomor satin fulfils the requirements of German DIN Norm 18032 for floors in sports halls and sporting facilities. Cross Linker: Irritant. Only for professional users. Recommended accessories: Laquer-Roll „Aquatop“.
Consumption: 1 l = 20 m² per application. Notes: Once mixed, the PU Sealer/Waxnomor and the cross linker are suitable for use for approx. 4 hours at the prescribed working temperature of 15-25°C. For this reason, only mix the quantity of sealer that can be processed within this period of time. Where sealer and cross linker are subjected to higher temperatures, the working time is reduced considerably. In case of cold components, the mixing procedure cannot be performed with sufficient thoroughness. Do not tightly seal the canister containing ready-mixed sealer since the sealer/cross linker mixture can, in the course of time, react even in the canister resulting in the build-up of reactive gases. Ensure that there is sufficient ventilation but avoid exposure to drafts and strong sunlight during application and drying processes and protect the surface from dust. Turn off under-floor central heating in good time prior to use. Technical Data pH level (sealer): approx. 8.0 (concentrate) pH level (cross linker): n.a. Product code for surface treatment agents (Giscode): W3/DD Data on ingredients (EC recommendations): Polymeric material, levelling agents, film-forming agents, additives. Store PU Sealer/Waxnomor in a dry place in its closed original container at temperatures of between 5°C and 30°C. Keep locked up and out of the reach of children. The cross linker must not be allowed to come into contact with moisture. Once broken into, re-seal the canister again tightly immediately after removing amounts of the product and use up remaining quantities as quickly as possible. The cross linker is subject to the legal stipulations of the Dangerous Goods Act and is marked with the hazard symbol "Xi" and the hazard definitions "Sensitisation possible as a result of skin contact. Harmful for water organisms, can have longer-term harmful effects if permitted to pollute open waters."
