Primer for mineral floors
Roller primer for mineral floors. Good penetration properties, even appearance. Emphasises the individual structure and design of the mineral basis. Provides optimal bonding for the subsequently applied PU Sealer. PLEASE
NOTE: To spread the primer, use a lacquer-tray – do not pour the primer directly onto the floor. Ensure adequate ventilation during application and drying, but avoid draughts or strong sunshine. Protect the surface against dust. Turn off any under-floor heating well in advance. With a flat brush prepaint corners and other places difficult to reach effectively with the roller. Then, as far as possible, overlap those places with the roller, to avoid paint-lines forming. CONSUMPTION: 60 to 80 grams per sq.metre. Attention: Before applying to a mineral mass floor for the first time, we recommend selecting a representative trial area. The recommendations of the manufacturer of the resin mass must be observed. In case of doubt, we request you to consult our technical applications department for advice beforehand. Technical Data pH value: approx. 6.5 (concentrate) substances contained: polymers, solvents, additives. Giscode: W3+ (product code for surface treatment products) Best before: use within 12 months VOC-content: limit value according to 2004/42/EG for the product (Kat.A/i) 140g/l (2007/2010). The ready-to-use product contains maximum 110 g/l VOC. Store primer in closed original container in a cool and dry place, protected from frost. Keep container sealed and out of the reach of children.
